From my recollection, if you get an error message during installation, wait a few more seconds then a popup window from windows 7 will appear and give you the otion to reinstall with the original setting (something like that anyway) Choose this option, and it will install the driver again in Vista legacy mode or XP legacy mode. Windows 7 is pretty good at utilising older drivers as I have found out. Try this and you should get it working.
Hi, I ran into all the same problems, but fixed them as follows:
1. Unzip the folder to a location (don't try to open setup.exe inside the zip folder)
2. Rightclick "Setup.exe" ==> Properties ==> 'Compatibility' Tab
3. Check "Run this program in compatibility mode for:" and choose Vista
4. "OK" ==> Run setup ==> It works!
The 64-bit Vista drivers for my RD-300SX work just fine in Windows 7, I have full range of functions.
Good luck, and complain here if this doesn't fix the problem for you.
Roland Corporation Japan has now released 32bit and 64 bit Windows 7 drivers for most of their recent instruments, including RD-700GX and RD-300GX. Please visit the global Roland.com website and you will find the drivers under the "downloads" tab of your synthesizer's product page.
I have the same problem with my Roland HP307. Some weeks ago, I put here a question about this but didnt receive any answer. Are the drivers for RD700GX good for my Roland HP 307 with windows Vista? I hope I`ll receive a answer this time... Thanks
Please go to this page http://www.roland.co.uk/products/productdetails.aspx?p=1055 and select the download tab.
Here you will find all the drivers for HP307.
Please note, this is not a technical support resource, but a forum for owners to help each other. Please contact local technical support if you need a reply from Roland.
