Roland Forums

Hello Community,

I hope someone can help me out with my problem. I have a Boss RC50 and a GT10 and want to use these two devices, for playing the didgeridoo live on it. My target is to play Didgeridoo and regulate effects on the GT10 on the same time and create phrases on my RC50. (Like DUBFX)
Could someone please explain me how to connect these two devices?
I have an Audix Clip Mikrophon that is attached to my didgeridoo and is plugged into the microphonsocket of the RC-50 Loopstation.

What I know is, I must plug the mike into the RC50 into the normal Microphonsocket.
The sound travels then from the didge-micro to the RC50. Then it goes to from the RC50 to the GT10. Then the effectet sound goes back to the RC50 where I can loop, record it. (Phrases)

Can someone explain me witch sockets i have to connect with each other?
Thank you guys for your help..
Lots of greetings, Joe

First off, the GT10 has a built in looper. I don't know if this is better or worst than the RC-50, but you might want to start with simply pluging your mike into the GT10 and experimenting with the set-up there. If you really need to incorportate the RC-50, then you would connect from the GT10 into the RC50 for its additional looping advantages, eg easier phrase/backing track selection. The output of the RC50 would ofcourse go to your amp.